comtecelectrical.ca/www.comtecelectrical.ca.tar/www.comtecelectrical.ca/infobots/Backup/MSOCache/All Users/90000409-6000-11D3-8CFE-0150048383C9/L2561412.CAB/LOCALDV.DLL_1033/string.txt

Text File | 2003-07-14 | 10KB | 140 lines

1    Unexpected error (%4) occurred.
2    Unknown string
34    The disk for file "%3" is full.  There is insufficient space on this disk to write the file.  Either free additional space on this disk or write the file to a disk which has more space available.
35    The volume for file "%3" was not found.  Check the spelling of the name and path and be sure that the volume is mounted and registered with the system.
36    An unexpected Input/Output error occurred for file "%3".  This could be a hardware problem or a corrupt file.  Try to read the file in the application which created it and save it again.
39    An unexpected end of file was encountered for file "%3".  This could be a hardware problem or a corrupt file.  Try to read the file in the application which created it and save it again.
42    Too many files are open - please close all unneeded files.
43    The file "%3" was not found by the %1 translator.  Check the spelling of the file name and path.  If the file is on a network or an external device, the volume must be mounted and registered with the system.
44    You do not have permission to write to the file "%3".  This could be because the disk is locked, the file is read-only, in use by another program, or because you do not have permission to use a network path.
45    The file "%3" is locked.  This could be because the disk is locked, the file is read-only, in use by another program, or because you do not have permission to use a network path.
50    Internal error:  Parameter error
54    You do not have permission for the file "%3".  This could be because the disk is locked, the file is read-only, in use by another program, or because you do not have permission to use a network path.
108    Out of memory.  There is insufficient memory to run the %1 translator.  Memory could be too small or fragmented.  Try exiting from all other applications, reboot and start this application alone.
109    Internal error:  Nil handle.
128    Canceled at user request.
192    Internal error:  A resource could not be found
204    Internal error:  Resource problem
208    The file "%3" was not recognized.  The %1 translator was unable to recognize this file.  It could be the wrong file, a version of the file type which is not supported by this translator, or the file might be corrupt.
300    General OLE error
301    OLE open storage failed
302    OLE create doc file failed
303    OLE copy storage failed
304    OLE open stream failed
305    OLE create stream failed
306    OLE copy stream failed
307    OLE seek stream failed
308    OLE read stream failed
309    OLE write stream failed
310    OLE initialization failed.  The %1 translator can't connect to the OLE system.  OLE may not have been properly installed or may have a corrupt module.  OLE is a part of Windows.  We suggest you reinstall Windows.
311    Unable to logon to Schedule+.  Schedule+ may be busy exporting a file or waiting to synchronize with the host.  Or if you have created a new profile you may need to run Schedule+ before importing data.
312    OLE file logon failed.  The file "%3" is not really a %1 file.   It could be the wrong file, a version of the file type which is not supported by this translator, or the file might be corrupt.
313    OLE program start failed.  The %1 translator was unable to start the program needed to access this file.  %1 must be installed in order to use %1 files.
314    In order to import from Act! (3.0, 4.0) for Windows, Act! (3.0, 4.0) for Windows must be installed.  Please make sure Act! (3.0, 4.0) for Windows is installed.
350    MAPI error %5 was reported.  This is the result of an error reported by the MAPI (Messaging Application Programming Interface) subsystem.
351    Get MAPI IDs failed (MAPI error %5).  This is the result of an error reported by the MAPI (Messaging Application Programming Interface) subsystem.
370    ODBC error %5 was reported.  This is the result of an error reported by the ODBC (Open Database Connectivity) subsystem.
401    Internal error:  Invalid command
402    Internal error:  Unimplemented command
403    Internal error:  Invalid mode
404    Internal error:  Invalid parameters
405    Outlook was unable to retrieve the data from the file "%3". Verify that you have the correct file, that you have permission to open it, and that it is not open in another program.
406    The %1 translator was unable to start the program needed to access this file.  %1 must be installed in order to use %1 files.
407    The file "%3" can not be imported because it was created with an earlier version of %1.  Please open and save this file with the latest version of %1, and try to import the file again.
410    The %1 file "%3" has no importable contents.  The file may be empty, or may be missing data tables or data ranges.  Use %1 to define the data you want to import.
411    The %1 file "%3" has no named ranges.  Use %1 to name the range of data you want to import.
412    The %1 file "%3" has no tables.  Use %1 to define tables for the data you want to import.
421    Internal error:  Unable to load System Access Module (.SAM) DLL
422    Internal error:  Can not find entry point in DLL
423    Internal error:  Unable to get message from library
424    Internal error:  Unable to load File Access Engine (.FAE) DLL, additional Outlook translators can be installed from the ValuPack.
425    Internal error:  Invalid SAM ID
426    Internal error:  Invalid SAM reference
427    Internal error:  SAM is already connected maximum number of instances
431    Internal error:  Send message has an invalid TO destination
432    Internal error:  Send message has an invalid Message
433    Internal error:  Get file content is not valid for this SAM
434    Internal error:  SAM can not destroy this object
501    Record not found
502    End of fields
503    Canceled at user request
601    Partial field map, user must complete it
602    No field map available, can not continue
611    Internal error:  Unable to find saved field map file
612    Internal error:  File is not a map file (invalid header)
613    Internal error:  Map file has an invalid element
614    Internal error:  Map file has an invalid record
615    Internal error:  Map file is incomplete
621    Internal error:  Field mapping is not available (can't find module)
701    Internal error:  Character translation buffer is too small
702    Internal error:  Invalid character set requested
703    Invalid character set in the file "%3".  The input file contains a character set which can not be translated.
711    Unable to get the format list
712    Unable to get the format description
713    Unable to get the default file
714    Unable to get the file system contents
715    Unable to connect to the file system
716    Unable to initialize the file system
717    Unable to open a file
718    Unable to get file mapping information
719    Unable to use file mapping information
720    Unable to read a record from a file
721    Unable to write a record to a file
722    Unable to close a file
723    Unable to disconnect from the file system
724    Unable to terminate the translation properly
725    Unable to abort the translation properly
726    Unable to recognize the file
727    Unable to get a file
728    Unable to store a file
1001    General warning
1520    Translation Error
1521    An error has occurred in the %1 translator %2.
1522    A file error has occurred in the %1 translator %2.
1523    A memory error has occurred in the %1 translator %2.
1524    An error occurred while importing  or exporting and the import/export was terminated.  \nMAPI error %1 was reported.  Please try to import/export again later.
1525    An OLE error has occurred in the %1 translator %2.
1526    An ODBC error has occurred in the %1 translator %2.
1527    Some of the items cannot be exported because they are headers and you are offline. Connect to your Microsoft Exchange Server, and then export again.
1530    Translation Warning
1531    You are importing data into a storage area that does not support certain multilingual features.  \nTo preserve multilingual content, it is recommended that you choose a location in your Local Store.  \nClick OK to continue with the chosen location.
1532    You are exporting data to a format that does not support certain multilingual features.  \nTo preserve multilingual content, it is recommended that you choose a format such as Excel or Access.  \nClick OK to continue with the chosen format.
1601    while initializing the Translation Manager
1602    while getting the list of translators
1603    while getting a translator description
1604    while trying to find the translator's file
1605    while trying to attach a translator
1606    while trying to establish a field map
1607    while trying to save a field map
1608    while trying to clear a field map
1609    while trying to present a field map dialog
1610    while trying to translate the data
1611    while trying to release a translator
1612    while trying to terminate a translation
1613    while trying to abort a translation
1614    while handling a message in the Translation Manager
1615    while deleting an object (internal)
1616    while trying to recognize a file
1617    while trying to get a file to copy
1618    while trying to write a copy of a file
1619    while getting the contents of a file system
1620    while initializing a translator to build a field map
1621    while opening a file to build a field map
1622    while getting mapping information from a file to build a field map
1623    while reading a record from a file to build a field map
1624    while closing a file when building a field map
1625    while terminating a translator when building a field map
1626    while initializing a translator to present a field map dialog
1627    while opening a file to present a field map dialog
1628    while getting mapping information from a file to present a field map dialog
1629    while reading a record from a file to present a field map dialog
1630    while closing a file when presenting a field map dialog
1631    while terminating a translator when presenting a field map dialog
1641    while initializing a translator to translate a file
1642    while opening a file for translation
1643    while sending field map information to a translator
1644    while trying to read a record to translate
1645    while trying to write a record to the result file
1646    while trying to close a file
1647    while terminating a translator